Rocket Motor Powered Boost Glider

For the advanced builder

On Sale! Regular 19.00, now 14.25

High Quality Laser Cut Balsa - Competition grade with spruce boom
Length - Pod and Glider 14" / 35cm
Glider Wingspan 14" / 35cm
Recommended engines: A2-2(first flight), A8-3, B4-2, B6-2
Instructions
Self Adhesive Decals
metal motor retaining clip
pod uses streamer recovery
Canopy nose cone or balsa nose cone
Skill Level 5 - for the experience modeller

Engine	Approximate Altitude
A	TBA
B	TBA

To build and launch this kit, you will also need (not included):

Please check the diameter of the kit you have. Kits shipping direct from Sunward™ now have a BT50 tube for the pod. Previous kits had a BT56 tube.
Recovery Wadding - or use Sunward™ BT56 Baffle or Sunward NOMEX 3x3" Fire Resistant Blanket - best to install when building.
Small tools
Sandpaper
Sealer and paints
White glue
Launch Pad and Launch Controller
Rocket Engines
Igniters

Sunward™ Boost Glider Model Rocket Kit
On Sale! Regular 19.00
Buy it Now for 14.25 USD

You may also be interested in the following:

Sunward™ BT50 Baffle Kit Buy it Now for 4.49 USD	Sunward™ 3" x 3" NOMEX On Sale! Regular 4.29 Buy it Now for 3.22 USD

Rocksim File Not Available for the Boost Glider Model Rocket Kit
Please note all Rocksim files are provided as a courtesy and are not meant to be 100% accurate - errors do exist. All rockets must be tested for stability prior to launch.

Recommended for ages 16 and up - adult supervision required for ages 14-15