Featherweight 24mm Av-bay

Featherweight 24mm Av-bay

SOLD OUT - NO STOCK

Sale Priced.  Regular $47.00

A great way to install a Featherweight altimeter in your rocket. This high quality Av-Bay /Avionics Bay is easy to assemble.

Features:

• Provides a built-in connector for your Raven.  Just tighten the Raven's screw terminals, plug in the battery, and the electrical connections are done!
• Some sanding of the plates may be required to fit into a BT50 tube or 24mm engine tube.
• Provides deployment charge electrical terminals for all 4 Raven outputs, 2 of which are available at both ends of the av-bay.  Combine that with the Raven's ability to work with either end up, and you get the most flexible av-bay setup available.
• Includes a magnetically-activated arm switch works like magic to turn your Raven on or off.  No need to align and drill your airframe for arm switches.
• Under 27 grams including altimeter, about half the weight of a 9V battery alone
• Everything fits into a 2" long coupler.
• The Featherweight av-bay's short length, low mass, and magnetically-activated arming, make it  the highest-performance Raven installation available.  In May 2010, it was used to fly an I motor over 17,000 feet and a J motor over 22,300 feet!

Included in the Av-Bay:

• One active bulkhead, including arm switch, and connectors for the Raven and battery
• A passive bulkhead that goes at the other end of the av-bay.
• A li-polymer battery capable of 9 Amps of current.
• Threaded rods and lots of extra nuts (1/8" size).
• A laser-cut plywood battery restraint.
• Neodymium magnet with 1" arming activation range.
• Due to size limitations, this Av-Bay does not include a built-in battery charger. A USB charger is available separately.

Some components may not be exactly as shown due to production changes and availability.

SOLD OUT - NO STOCK