Sunward Logo   Sitemap   Ordering Info  
Paypal Logo


Gravity Rider - antares class™ Model Rocket Kit
Sunward Gravity Rider Model Rocket Kit Decal
  • Includes decal
  • 3 co lour with WHITE
  • Silkscreen decal - perfect for outdoor use
  • strong mylar
  • about 5 1/2" x 4 1/2" / 11.5 by 14 cm
Parachute Recovery  Skill Level 3

Gravity Rider™ - antares class™ Model Rocket

Long Rocket

  • High Quality Laser Cut Balsa
  • Safe 18" parachute recovery
  • HUGE - Length 40" / 101cm
  • Wingspan 10 1/2" / 26cm
  • includes metal motor retaining clip
  • build as a cluster or as a single engine unit
  • Recommended engines: B4-2(first flight), C6-3
  • Instructions
  • Self Adhesive Decals
  • Skill Level 3
Engine
Approximate
Altitude
B
TBA
C
TBA

To build and launch this kit, you will also need (not included):
  • Recovery Wadding - or use Sunward BT50 Baffle or Sunward™ NOMEX 3x3" Fire Resistant Blanket - best to install when building.
  • Small tools
  • Sandpaper
  • Sealer and paints
  • White glue
  • Launch Pad and Launch Controller
  • Rocket Engines
  • Igniters
Sunward Gravity Rider - antares class™ Model Rocket Kit
Buy it Now for 26.00 USD
You may also be interested in the following: (Two required for cluster flights. One cluster cable only)
Sunward BT50 Baffle Kit
Buy it Now for 4.49 USD
Sunward 3" x 3" NOMEX
On Sale! Regular 4.29
Buy it Now for 3.22 USD
Sunward™ 2 Motor Cluster Cable/ Clip Whip
Buy it Now for 11.99 USD
 
 
Rocksim File Not Available for the Gravity Rider™ Model Rocket Kit
Please note all Rocksim files are provided as a courtesy and are not meant to be 100% accurate - errors do exist. All rockets must be tested for stability prior to launch.

Recommended for ages 14 and up - adult supervision required for ages 14-16
   


Rocket image registered with the United States Copyright Office

The following is the initial version of the Gravity Rider™ and is not longer available from Sunward™.
This information is provided for historical purposes.



Gravity Rider Model Rocket Kit
Parachute Recovery  Skill Level 3

Gravity Rider™ Model Rocket

Long Rocket

  • High Quality Laser Cut Balsa
  • State of the Art Rocket Fighter Design
  • Safe 18" parachute recovery
  • HUGE - Length 40" / 101cm
  • Wingspan 10 1/2" / 26cm
  • Body Tube Diameter: 1.346"
  • includes metal motor retaining clip
  • Recommended engines: B4-2(first flight), C6-3
  • Instructions
  • Self Adhesive Decals
  • Skill Level 3
Engine
Approximate
Altitude
B
TBA
C
TBA

To build and launch this kit, you will also need (not included):
  • Recovery Wadding - or use Sunward BT56 Baffle or Sunward™ NOMEX 3x3" Fire Resistant Blanket - best to install when building.
  • Small tools
  • Sandpaper
  • Sealer and paints
  • White glue
  • Launch Pad and Launch Controller
  • Rocket Engines
  • Igniters

Currently out of stock. Currently available from your local retailer.

Rocksim File Not Available for the Gravity Rider™ Model Rocket Kit
Please note all Rocksim files are provided as a courtesy and are not meant to be 100% accurate - errors do exist. All rockets must be tested for stability prior to launch.

Recommended for ages 14 and up - adult supervision required for ages 14-16


© Copyright 2004, 2005, 2006, 2007, 2008, 2009, 2010 Sunward™ Aerospace Group Limited. All Rights Reserved.