|
Inspired by the Canadair Cl-289 airborne
surveillance system
- High Quality Laser Cut Balsa
- Safe 18" parachute recovery
- Length 30" / 76cm
- Wingspan 6" / 15cm
- Body Tube Diameter: 1.346"
- includes metal motor retaining clip
- Canopy Nose cone or Balsa Nose cone
- Recommended engines: B4-2(first flight),
B6-4, and C6-5
- Instructions
- Self Adhesive Decals
- Skill Level 3
Engine |
Approximate
Altitude |
| B |
TBA |
| C |
TBA |
To build and launch this kit, you will also need (not included):
- Recovery Wadding - or use Sunward™ BT56
Baffle or Sunward NOMEX
3x3" Fire Resistant Blanket - best to install when building.
- Small tools
- Sandpaper
- Sealer and paints
- White glue
- Launch Pad and Launch Controller
- Rocket Engines
- Igniters
|
Sunward™ Shoot the Moon™ Model Rocket Kit
Buy it Now for 17.00 USD
|
|
You may also be interested in the following:
|
|
Sunward™ BT56 Baffle Kit Buy it Now for 4.99 USD
|
Sunward™ 3" x 3" NOMEX Buy it Now for 4.29 USD
|
|
|
|
Rocksim File Not Available for the Shoot the Moon™ Model Rocket Kit
Please note all Rocksim files are provided as a courtesy and are not meant
to be 100% accurate - errors do exist. All rockets must be tested for stability
prior to launch.
Recommended for ages 10 and up - adult supervision required for ages 10-16
|
 |
- Includes decal
- 3 colour with WHITE
- Silkscreen decal - perfect for outdoor use
- strong mylar
- about 5 1/4" x 2 1/2" / 6 by 13 cm
|
|
© Copyright 2004, 2005, 2006, 2007, 2008 Sunward™ Aerospace Group Limited. All Rights Reserved.